Last Updated: 18 May 2024

   |   

Author: 18.117.8.216

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
Next revision Both sides next revision
server-tech:centos:adding-formatting-a-new-drive [Apr 1, 2022 08:59 PM]
dordal created 		server-tech:centos:adding-formatting-a-new-drive [Apr 24, 2024 07:18 AM]
216.244.66.236 old revision restored (Nov 24, 2023 01:37 PM)
Line 19: Line 19:
  
 If you don't see the disk from the first bus, you may need to scan the others: If you don't see the disk from the first bus, you may need to scan the others:
 +
 +''# echo "- - -" > /sys/class/scsi_host/host1/scan''
  
 ''# echo "- - -" > /sys/class/scsi_host/host2/scan'' ''# echo "- - -" > /sys/class/scsi_host/host2/scan''
-''# echo "- - -" > /sys/class/scsi_host/host3/scan'' 
  
 Eventually the disk should show up in /var/log/messages. Let's assume it is ''/dev/sdb'' Eventually the disk should show up in /var/log/messages. Let's assume it is ''/dev/sdb''
Line 36: Line 37:
  
 ''# lvcreate -l 100%VG -n data mysql'' ''# lvcreate -l 100%VG -n data mysql''
 +
 +== Formatting & Mounting the Disk ==
  
 6. Make the XFS filesystem: 6. Make the XFS filesystem:
Line 50: Line 53:
  
 9. If you want the drive to mount at boot, add an entry in ''/etc/fstab'' 9. If you want the drive to mount at boot, add an entry in ''/etc/fstab''
 +
 +You're done. If you want to see if your new drive is online, check ''df -h'' and you should see it.