Last Updated: 12 Jun 2026

   |   

Author: 46.19.228.15

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
server-tech:centos:adding-formatting-a-new-drive [Jun 12, 2026 07:20 PM]
46.19.228.15 old revision restored (May 25, 2026 05:02 PM) 		server-tech:centos:adding-formatting-a-new-drive [Jun 13, 2026 08:32 AM] (current)
120.149.46.197 old revision restored (May 28, 2026 08:02 PM)
Line 19: Line 19:
  
 If you don't see the disk from the first bus, you may need to scan the others: If you don't see the disk from the first bus, you may need to scan the others:
 +
 +''# echo "- - -" > /sys/class/scsi_host/host1/scan''
  
 ''# echo "- - -" > /sys/class/scsi_host/host2/scan'' ''# echo "- - -" > /sys/class/scsi_host/host2/scan''
-''# echo "- - -" > /sys/class/scsi_host/host3/scan'' 
  
 Eventually the disk should show up in /var/log/messages. Let's assume it is ''/dev/sdb'' Eventually the disk should show up in /var/log/messages. Let's assume it is ''/dev/sdb''
Line 36: Line 37:
  
 ''# lvcreate -l 100%VG -n data mysql'' ''# lvcreate -l 100%VG -n data mysql''
 +
 +== Formatting & Mounting the Disk ==
  
 6. Make the XFS filesystem: 6. Make the XFS filesystem:
Line 50: Line 53:
  
 9. If you want the drive to mount at boot, add an entry in ''/etc/fstab'' 9. If you want the drive to mount at boot, add an entry in ''/etc/fstab''
 +
 +You're done. If you want to see if your new drive is online, check ''df -h'' and you should see it.