Adding & Formatting a New Drive Under CentOS [StartupCTO]

Last Updated: 24 Apr 2024

|

Author: 114.119.152.8

Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 216.244.66.236
Lock expires at: Apr 25, 2024 10:04 AM (245 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

= Adding & Formatting a New Drive Under CentOS =

I always have trouble remembering the magic set of incantations required to add a new drive in CentOS... particularly without rebooting.

Here's what I usually do. Note this makes some assumptions:

* You want to use LVM so you can expand/contract the size of the disk later.
* You want use XFS for your filesystem

== Adding the Disk ==

1. First, add the disk itself. You're probably using VMWare or something, so you can do this via the VMWare admin interface.

2. Either reboot so the machine sees the disk, or scan the SCSI busses:

''# tail -f /var/log/messages''

''# echo "- - -" > /sys/class/scsi_host/host0/scan''

If you don't see the disk from the first bus, you may need to scan the others:

''# echo "- - -" > /sys/class/scsi_host/host2/scan''
''# echo "- - -" > /sys/class/scsi_host/host3/scan''

Eventually the disk should show up in /var/log/messages. Let's assume it is ''/dev/sdb''

3. Create the physical volume:

''# pvcreate /dev/sdb''

4. Create the volume group ('mysql' in this case):

''vgcreate mysql /dev/sdb''

5. Create the logical volume ('data'):

''# lvcreate -l 100%VG -n data mysql''

6. Make the XFS filesystem:

''# mkfs.xfs /dev/mapper/mysql-data''

7. Make the mountpoint:

''# mkdir /data''

8. Mount the drive:

''# mount /dev/mapper/mysql-data /data''

9. If you want the drive to mount at boot, add an entry in ''/etc/fstab''

Page locked

About Me

Recent Changes

Get In Touch

Follow