Running fsck on Large Paritions in FreeBSD [StartupCTO]

Last Updated: 21 Nov 2020

|

Author: 127.0.0.1

Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 51.161.37.87
Lock expires at: Dec 6, 2025 11:05 AM (248 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

= Running fsck on Large Paritions in FreeBSD =

If you need to run ''fsck'' on a large FreeBSD partition, you might have a bit of trouble. fsck needs a fair bit of memory to do its work, and if you don't have enough, you'll run into difficulties getting to to complete. Here are some steps to help get fsck to run:

== The Error Messages ==

If fsck runs out of memory, you'll see something like 
<code>
fsck_ufs: cannot alloc 30326 bytes for inoinfo
</code>
or 
<code>
fsck_ufs: cannot increase directory list
</code>

== The Fix ==

You need to tell the kernel that it can use more memory for a single process than it otherwise could. This is accomplished by setting ''kern.maxdsiz'' in ''/boot/loader.conf''. By default, this 'datasize' value is set at half the installed RAM size:
<code>
[root@bergen ~]# limits
Resource limits (current):
  cputime          infinity secs
  filesize         infinity kB
  datasize           524288 kB
  stacksize           65536 kB
  coredumpsize     infinity kB
  memoryuse        infinity kB
  memorylocked     infinity kB
  maxprocesses         1789
  openfiles            3578
  sbsize           infinity bytes
  vmemoryuse       infinity kB
</code>

In ''/boot/loader.conf'', you'll want to add:
<code>
kern.maxdsiz="2684354560" # 2.5GB
</code>

What values you use are up to you, but the general rule of thumb is that you need [[http://groups.google.com/group/lucky.freebsd.stable/msg/4f1dcc954ecb7392|1GB for every 1TB of partition that is filled with data.]] In my experience on FreeBSD 6.3, the actual number seems to be a little less than that, as I was able to ''fsck'' a 3.5TB filesystem with 2.5GB allocated.

**If you have extra RAM sitting around, install it.** ''fsck'' can use swap space, but that makes it run //really// slowly, and it is best if it can keep its data in RAM. The more RAM you have, the better.

== The 4GB (32-bit) Limit ==

There is one other limit to worry about. If you're using the 32-bit ''i386'' version of FreeBSD, your system cannot by default access more than 4GB of RAM, as that is the limit of the 32-bit address space. If you set ''kern.maxdsiz'' at, beyond, or even close to ''4294967296'', your system may crash on boot or during ''fsck''. Supposedly, recompiling your kernel with PAE extensions can fix this, but I've yet to try it. 

If you accidentally set the limit too high, you can unset it via the boot loader:
 * When the FreeBSD boot menu comes up, say 'Escape to Boot Prompt'
 * Type ''unset kern.maxdsiz''
 * Type ''boot''

Page locked

About Me

Recent Changes

Get In Touch

Follow